
		High Temperature Cables

Special Cables

High Temperature Cables

TML Cable Flat - Type A for Process Water, Type B for Drinking Water

Product application :

As connection cable for submersible electric motors (pumps) for the permanent use in process and drinking

water up to a temperature of 70°C.

Product characteristic:

Construction:

Fine stranded bare copper conductor

EPR outer sheath

EPR insulation

Technical:

Characteristics at 20oC:

Rated voltage : 600/1000V

Maximum admissible operating voltage:

in 1 ph and 3 ph systems : 720 / 1200V

in D C systems : 1800 V

conductor resistance to DIN / VDE 0295

Test voltage 50Hz, 5 min : 2500 V

Temperature range:

Maximum admissible conductor

Temperature in operation 90°C

Short circuit temperature 250°C

Fixed : -40°C up to + 80°C

In motion : -25°C up to + 80°C

Tensile stress : maximum 15 N each sqmm conductor cross section

Properties:

Adapted to DIN VDE 0250 and DIN VDE 0282

Excellent insulation properties in water

Very low water absorption

Preservation of the mechanical strength

VI.31/10904/01 - confirming the suitability of TML type B in drinking water.

Product specification:

AWG	No. of Cores	Conductor cross section mm²	Outer Diameter mm x mm	Gross Copper weight kg/km	Gross weight kg / km
16	3	1.5	13 x 7	43	125
14	3	2.5	16 x 8	72	185
12	3	4	19 x 9	115	290
10	3	6	23 x 10	173	400
8	3	10	28 x 12	288	620
6	3	16	31 x 14	461	900
4	3	25	37 x 17	720	1150
2	3	35	38 x 17	1008	1550
1	3	50	45 x 20	1440	2200
2/0	3	70	52 x 22	2016	2900
3/0	3	95	58 x 25	2736	3800
16	4	1.5	17 x 7	58	160
14	4	2.5	20 x 8	96	250
12	4	4	24 x 9	154	340
10	4	6	26 x 10	230	450
8	4	10	31 x 11	384	850
6	4	16	36 x 13	614	1200
4	4	25	45 x 15	960	1600
2	4	35	48 x 17	1344	2100
1	4	50	59 x 20	1920	2900

Note: The parameters listed above are nominal values as per cable standards. Actual values may vary due to material and manufacturing process variations. For precise specifications or customized requirements, please contact us for further information