 |
|||
 |
Windmill Cables |  |
|
|
|||
| EPR/HFXLEVA LSOH 0.6/1kV Torsion Resistant Power Cable |  |
HFEPR/HFEVA 0.6/1kV LSOH Screened Torsion Resistant Power Cable | |
Al Conductor EPR/XLEVA 0.6/1kV LSOH Power Cable 90℃ | |
more |
Windmill Cables
A-DQ(ZN)B2Y Fibre Optic Cables
Application
A-DQ(ZN)B2Y Fibre Optic Cables are easy to mount and rodent-protected, suitable for underground, tubes
and channel areas, where normal tensile stresses and/or transverse compressions occur and rodent infestation
is to be expected.
Standards
DIN VDE 0888
IEC 60794
Construction
B2Y Fibre Optic Cables.jpg "A-DQ(ZN)B2Y Fibre Optic Cables")
Fibre Type: Loose Tube.
Strain Relief: Glass yarns.
Armour: Glass yarns.
Sheath: PE.
Technical Data
Operating Temperatures:-20℃~+60℃
Minimum Bending Radius:150mm
Corrosive Gases:EN 50267-2
UV Resistant:Yes
Longitudinally Water-tight:Yes
Dimensions and Weight
| Construction | Fibre Type | Nominal Overall Diameter | Nominal Weight |
|---|---|---|---|
| No. of fibres | - | mm | kg/km |
| 2~12 | Multimode G50/125 | 7.5 | 40 |
| 2~12 | Multimode G62.5/125 | 7.5 | 40 |
| 2~12 | Single-Mode E9/125 | 7.5 | 40 |
| 24 | Multimode G50/125 | 8.5 | 60 |
| 24 | Multimode G62.5/125 | 8.5 | 60 |
| 24 | Single-Mode E9/125 | 8.5 | 60 |
Note: The parameters listed above are nominal values as per cable standards. Actual values may vary due to material and manufacturing process variations. For precise specifications or customized requirements, please contact us for further information