Type TC VFD Power Cable|VFD Cables|Caledonian Cables

VFD Cables

Type TC VFD Power Cable

Application

These cables are used to supply power to motors, or for connection to other power devices in industrial

settings. Primary installations include cable trays, raceways, and outdoor locations where supported by a

messenger wire.

Type TC - VFD is listed for direct burial or in underground ducts and for use in Class 1, Division 2 hazardous

locations and Class 1 control circuits. This cable may be used in wet or dry locations at temperatures not to

exceed 90°C.

Construction

Conductor :Class B stranded, uncoated annealed copper conforming to ASTM B-3 and B-8.

Insulation:Each conductor is insulated with black Crosslinked Polyethylene (XLP) conforming to UL Standard 44

for Type RHH/RHW-2.

Color code:Each conductor is black and printed with its conductor number.

Ground Wires:Three Class B stranded annealed copper conforming to ASTM B-3 and B-8

Filers:Non-hygroscopic fillers.

Shield:5 mil un-coated copper tape is helically wrapped over the twisted assembly with a 50% (nominal) overlap.

The shield shall be in contact with the ground wire.

Sheath:A black, flame retardant Polyvinyl Chloride (PVC).

Technical Information

Rated voltage – 600/2000 Volt

CSA – FT-4

TC-ER – 600 Volt

Rated temperature – 90C

Cable Parameter