Airport Cable  

 FAS (Fire Alarm System)

Control Cable FFX200 05SZ1-R/F 2G2.5

FFX200 05SZ1-R 2G1.5 (CU/SR/LSZH 2×1.5mmsq 300/500V class 2)

FFX200 05SZ1-F 2G1.5 (CU/SR/LSZH 2×1.5mmsq 300/500V class 5)

FFX200 05SZ1-F 2G1.5 (CU/SR/LSZH 2×1.5mmsq 300/500V class 5) FFX200 05SZ1-R/F 2G2.5    


Airport cables are single pair stranded flexible cables sheathed with thermoplastic LSZH compound. Airport

cables have the ability to restrict the propagation of the flame in the event of a fire. Airport cable is especially

important to slow down the spreading of the fire as the cables may pass from one area to another within a

building. Applications can be found in control and power circuits, power stations, underground tunnels, lifts,

escalators, and high-rise buildings.


Basic design :BS 7629-1

Halogen Free :IEC 60754-1

No corrosive gas emission :IEC 60754-2

Minimum Smoke Emission :IEC 61034/1/2

Reduced Fire Propagation :IEC 60332-3C / NF C 32-070-2.2 (C1)

Flame Retardance :IEC 60332-1 / NF C 32-070-2.1 (C2)

Fire Resistance :IEC 60331 / BS 5839-1 Clause 26 2d / NF C 32070-2.3(CR1)




Conductor: Plain annealed copper wire, stranded according to IEC(EN) 60228 class 2 or class 5.

Insulation: Fire resistant silicone rubber compound type EI2 as per BS 7655-1.1.

Outer Sheath: Thermoplastic LSZH compound type LTS3 as per BS 7655-6.1.


Dielectric test: 2000 V r.m.s. x 5’ (core/core)

Insulation resistance :300 MΩ x km (at 20°C)

Short circuit temperature :350°C


Temperature range during operation (fixed state): -30°C – +90°C

Temperature range during installation (mobile state): -20°C – +50°C

Minimum bending radius: 8 × Overall Diameter


FFX200 05SZ1-R 2G2.5

FFX200 05SZ1-F 2G2.5

No.of pair x Nominal Cross
Sectional Area
Number &
Nominal Diameter of Strands
Nominal Insulation Thickness Nominal Sheath Thickness Nominal Overall Diameter Approx. Weight
  mm2 No/mm mm mm mm kg/km
2 2.5 7/0.67 0.8 1.0 9.0 105
2 2.5 50/0.25 0.8 1.0 9.0 105