Windmill Cables
EPR/HFXLEVA LSOH 0.6/1kV Torsion Resistant Power Cable HFEPR/HFEVA 0.6/1kV LSOH Screened Torsion Resistant Power Cable Al Conductor EPR/XLEVA 0.6/1kV LSOH Power Cable 90℃ more

  Windmill Cables

NTSCGEWOEU Medium Voltage Torsion Resistant Cable

NTSCGEWOEU

Application

These cables are specifically designed for carrying medium voltage energy from the transformer in the nacelle to

the bottom of the tower.

Standards

DIN VDE 0250 Part 813

Construction

Conductor:Stranded tinned copper, class 5 according to DIN VDE 0295/IEC 60228.

Inner Conductor Layer: Semiconductive rubber compound.

Insulation: Heat resistant EPR.

Outer Conductor Layer: Semiconductive rubber compound.

Sheath: Heat and cold resistant special rubber compound based on CM (Chlorinated synthetic rubber) or CR (Chloroprene rubber).

Technical Data

Rated Voltage U0/U (Um) 12/20kV, 18/30kV, 20/35kV
Operating Temperatures -40℃~+90℃
Minimum Bending Radius 10×OD
Torsion Application +/100°/m
Maximum Permissible Tensile Load 20N/mm²
Short-circuit Temperature 200℃
Flame Retardant DIN EN 502652-1/IEC 60332-1
Oil Resistant Yes
Ozone Resistant Yes
UV Resistant Yes

Dimensions and Weight

12/20kV

Construction Nominal Overall Diameter Nominal Weight
No. of cores×mm² mm kg/km
3×25/25 61.2 4780
3×35/35 65.9 5700
3×50/50 69.5 6630
3×70/70 73.5 7840

18/30kV

Construction Nominal Overall Diameter Nominal Weight
No. of cores×mm² mm kg/km
3×25/25 79.1 7520
3×35/35 80.5 8050
3×50/50 83.1 8920
3×70/70 89.0 10600

20/35kV

Construction Nominal Overall Diameter Nominal Weight
No. of cores×mm² mm kg/km
3×25/25 86.2 8820
3×35/35 90.8 10000
3×50/50 93.0 10830
3×70/70 96.1 12050