Rolling Stock Cables
EN 50264 EN 50306 EN 50382 Databus Cables NF F 63-826 NF F 63-808 NF F 63-827 RSE/STD/024 PART 6

Rolling Stock Cable

NF F 63-826 Standard Wall Power & Control Cable

FIREROL FRF-SW-1.5S/FRF-SW-3S

1500/3000 V -Standard Wall Single Core Sheathed Cables

 

 

Application

1500/3000 V -Standard Wall Single Core Sheathed Cables are used as power and control cable for protected

installations inside and outside of rail and transport vehicles, where handling and installation cost are an

important factor, suitable for use in control, auxiliary and main circuit wiring such as cable harnesses,

switchboards and control panels, driver desks etc

Construction

Conductor： Stranded tinned copper wires to IEC 60228 Class 5

Insulation： Halogen free compound

Sheath： Halogen free compound

 

NF F 63-826 (FRF-SW-1.5S/FRF-SW-3S)

                                                            A. Conductor B. Insulation C. Sheath

Electrical & Mechanical Properties

Nominal Voltage:1500V, 3000V

Maximum Conductor Temperature:90°C/105°C

Minimum Permissible Ambient Temperature:-25°C~90°C

Bending Radius:4 × Overall Diameter

Standards

NF F 63-826

NF F 16-101

BS 6853

Fire Performance in general

EN 50265-2-1; IEC 60332-1-2; NF C 32-070 2.1 (C2) Vertical flame propogation for a single insulated wire or cable
EN 50266-2-4 + EN 50305; IEC 60332-3-24;
NF C 32-070 2.2 (C1); VDE 0472 Teil 804		 Vertical flame spread of vertically mounted bunched wires or cables
EN 50268-2; IEC 61034-2; NF C 32-073 ;
NF C 20-902; NF F 16 101; VDE 0472 Teil 816 		Low Smoke Emission
EN 50267-2-1; IEC 60754-1; NF C 32-074;NF C 20-454; VDE 0472 Teil 815 Halogen Free
EN 50267-2-2/3; IEC 60754-2; NF C 32-074;NF C 20-453; VDE 0472 Teil 813 Low Corrosivity (Acidity & Conductivity)
EN 50305; NFX 70-100; NFF 63808; TM1-04; BS6853 Low Toxicity
NFF 16101; NFF 63808; BS6853 Smoke index
EN45545-2 Requirement for fire behavior of materials & components
R15/R16

FRF-SW-1.5S 1500V

Nominal Cross Sectional Area Number & Nominal Diameter of Strands Nominal Insulation Thickness Nominal Sheath Thickness Overall Diameter Weight
Min. Max.
mm² No/mm mm mm mm mm kg/km
1.5 30/0.25 2.3 1.5 8.9 9.9 130
2.5 50/0.25 2.3 1.5 9.3 10.3 145
10.0 80/0.40 2.3 1.8 11.9 13.3 290
50.0 396/0.40 2.5 2.2 18.3 20.3 850
120.0 608/0.50 2.8 2.6 25.0 27.5 1770
150.0 756/0.50 2.8 2.6 26.7 29.3 2150
185.0 925/0.50 2.9 2.8 29.0 31.8 2530

FRF-SW-3S 3000V

Nominal Cross Sectional Area Number & Nominal Diameter of Strands Nominal Insulation Thickness Nominal Sheath Thickness Overall Diameter Weight
Min. Max.
mm² No/mm mm mm mm mm kg/km
150.0 756/0.50 3.6 2.6 28.2 30.9 2270
185.0 925/0.50 3.7 2.8 30.5 33.4 2660

Note: The parameters listed above are nominal values as per cable standards. Actual values may vary due to material and manufacturing process variations. For precise specifications or customized requirements, please contact us for further information