Rolling Stock Cables
EN 50264 EN 50306 EN 50382 Databus Cables NF F 63-826 NF F 63-808 NF F 63-827 RSE/STD/024 PART 6

 FIREROL STANDARD WALL SINGLE CORE UNSHEATHED & FIRE RESISTANT CABLES 0.6/1KV OR

1.8/3KV

FIREROL FRL-SW-1SU-PH15/30, FRL-SW-3SU-PH15/30/60

FIREROL FRL-SW-1SU-PH15/30, FRL-SW-3SU-PH15/30

  A. Conductor B. Insulation

Application

Used as power cable and control cable for protected installations inside and outside of rail and transport

vehicles, where handling andinstallation cost are an important factor.

Used in control, auxillary and main circuit wiring such as cable harnesses, switchboards and control panels,

driver desks etc.

Construction

Conductor

Flexible tinned annealed copper wires, stranded as per HD 383 (IEC 60228) class 5

Insulation

Mica tape+LSZH elastomeric compound as defined in EN 50264-1 (EI 101 to EI 104)

Electrical & Mechanical Properties

Nominal Voltage:0.6/1 kV or 1.8/3 kV

Maximum Conductor Temperature:90°C (fixed installation)

Minimum Permissible Ambient Temperature:-25°C/-40°C (fixed installation)

Bending Radius:3 x Overall Diameter (D<12mm);
                         4 x Overall Diameter (D>12mm)

Chemical & Environmental Properties

EN 60684-2:No fluorine

EN 50305; EN 60811-2-1:Resistance to oil & fuel

EN 50305:Resistance to ozone

Fire Performance for rolling stock application

EN 50306-2:Hazard levels HL1, HL2/HL3

DIN 5510-2:Protection level 1/2/3/4

BS 6853:Interior use 1a, 1b, II; Exterior use 1a, 1b, II

NF F 16-101:FO

EN54454-2:R15 Interior/ R16 Exterior HL1, HL2, HL3

EN50200:PH15, PH30, PH60

Fire Performance in general

EN 50265-2-1; IEC 60332-1; BS 4066-1 Vertical flame propogation for a single insulated wire or cable
EN 50266-2-4 + EN 50305; IEC 60332-3-24;
NF C 32-070 2.2 (C1); VDE 0472 Teil 804		 Vertical flame spread of vertically mounted bunched wires or cables
EN 50268-2; IEC 61034-2; NF C 32-073 ;
NF C 20-902; NF F 16 101; VDE 0472 Teil 816 		Low Smoke Emission
EN 50267-2-1; IEC 60754-1; NF C 32-074;NF C 20-454; VDE 0472 Teil 815 Halogen Free
EN 50267-2-2/3; IEC 60754-2; NF C 32-074;NF C 20-453; VDE 0472 Teil 813 Low Corrosivity (Acidity & Conductivity)
EN 50305; NFX 70-100; NFF 63808; TM1-04; BS6853 Low Toxicity
NFF 16101; NFF 63808; BS6853 Smoke index
EN45545-2 Requirement for fire behavior of materials & components
R15/R16
EN 50200:2000 Resistance to fire of unprotected small cable for use in
emergency circuits. 5 classifications are defined: PH 15,30

FRL-SW-1SU-PH15/30 0.6/1 kV

Nominal
Cross-Sectional
Area		 Conductor
Diameter
(a)		 Min. Mean
Thickness
of Insulation		 Overall
Diameter		 Weight Maximum Conductor Resistance Insulation Resistance
min max 20°C 20°C 90°C
mm2 mm mm mm mm kg/km Ω/km MΩ x km MΩ x km
1.0 1.25 0.8 2.8 3.2 18 20 65 0.65
1.5 1.5 0.8 3.0 3.5 20 13.7 55 0.55
2.5 1.95 0.8 3.4 3.9 30 8.21 50 0.5
4.0 2.5 0.8 3.9 4.6 50 5.09 40 0.4
6.0 3.0 0.9 4.6 5.4 70 3.39 35 0.35
10 3.9 1.1 5.8 6.8 130 1.95 30 0.3
16 5.0 1.1 7.2 8.5 170 1.24 30 0.3
25 6.4 1.3 8.6 10.0 260 0.795 30 0.3
35 7.7 1.3 10.2 11.5 350 0.565 25 0.25
50 9.2 1.5 11.6 13.5 500 0.393 25 0.25
70 11.0 1.5 13.3 15.5 690 0.277 20 0.2
95 12.5 1.6 14.9 17.4 910 0.210 20 0.2
120 14.2 1.6 16.5 19.3 1120 0.164 20 0.2
150 15.8 1.9 18.5 21.7 1430 0.132 15 0.15
185 17.5 1.9 20.1 23.6 1720 0.108 15 0.15
240 20.1 2.1 22.9 25.8 2290 0.0817 15 0.15
300 22.5 2.2 25.4 29.7 2810 0.0654 10 0.1
400 25.8 2.3 28.7 33.6 3690 0.0495 10 0.1

FRL-SW-3SU-PH15/30 1.8/3 kV

Nominal
Cross-Sectional
Area		 Conductor
Diameter
(a)		 Min. Mean
Thickness
of Insulation		 Overall
Diameter		 Weight Maximum Conductor Resistance Insulation Resistance
min max 20°C 20°C 90°C
mm2 mm mm mm mm kg/km Ω/km MΩ x km MΩ x km
1.5 1.5 2.5 6.2 7.3 70 13.70 120 1.2
2.5 1.95 2.5 6.6 7.8 90 8.21 100 1.0
4.0 2.5 2.5 7.1 8.4 110 5.09 90 0.9
6.0 3.0 2.5 7.6 8.9 130 3.39 80 0.8
10 3.9 2.5 8.4 9.9 190 1.95 65 0.65
16 5.0 2.5 9.5 11.1 250 1.24 55 0.55
25 6.4 2.5 10.8 12.7 330 0.795 45 0.45
35 7.7 2.5 12.0 14.1 430 0.565 40 0.4
50 9.2 2.5 13.4 15.7 570 0.393 35 0.35
70 11.0 2.5 15.1 17.7 760 0.277 30 0.3
95 12.5 2.7 16.9 19.8 980 0.210 30 0.3
120 14.2 2.7 18.5 21.7 1210 0.164 25 0.25
150 15.8 2.7 20.0 23.4 1500 0.132 20 0.2
185 17.5 2.7 21.6 25.3 1800 0.1080 20 0.2
240 20.1 2.7 24.1 28.2 2360 0.0817 20 0.2
300 22.5 2.7 26.3 30.8 2840 0.0654 15 0.15
400 25.8 2.9 29.8 34.9 3800 0.0495 15 0.15