Heim
Über uns
Produkte
Herunterladen
Technische Lib
Kontakt
Anfrage
Sitemap
Links
 

Alarm u. Audio u. Elektronisches Kabe

Belden gleichwertige Kabel

Koaxial-Kabel

SteuerKabel

LWL Kabel

Flexible Kabel

Instrumentation Kabel

Lan Kabel
EnergieKabel
Bahn-Kabel

Robotik

Rolling Stock Kabel
Gummi u. Kran Kabel
Sicherheit Kabel

Telefon Kabel

Flughafen Kabel

Bus-Kabel

Kabelverschraubungen

Daten Kabel

Heat Detection Kabel
Hochtemperatur-Kabel
Highway Kabel
Marine, Öl, Gas & Petrochemie-Kabel
Special Cables
Spiralkabel
Thermoelement-Kabel
Other Cable
     
  Indoor tight buffer fiber optic cable  
Indoor Used Tight Buffered Fiber
Optical Cable
outdoor multi loose tube fiber optic cable
Outdoor Used Multi Loose Tube
Fiber Optical Cable
 
  Rolling Stock Kabel

Rolling Stock Kabel

EN 50264 Standard Wall Power & Control Cable

FIREROL FRL-SW-1SU/FRL-SW-3SU

0.6/1 or 1.8/3 kV - single core

EN 50264 Standard Wall Power & Control Cable
A. Conductor                                              B. Insulation

Anwendung

-Used as power and control cable for protected installations inside and outside of rail and
transport vehicles, where handling and installation cost are an important factor.

-Used in control, auxillary and main circuit wiring such as cable harnesses, switchboards
and control panels, driver desks etc.

Bau

Dirigent
Flexible tinned annealed copper wires, stranded as per HD 383 (IEC 60228) class 5

Isolierung
LSZH elastomeric compound as defined in EN 50264-1 (EI 101 to EI 104)

Electrical & Mechanical Properties

Nominal Voltage 0.6/1 kV or 1.8/3 kV
Maximum Conductor Temperature +90 deg (fixed installation)
Minimum Permissible Ambient Temperature -25/-40 deg (fixed installation)
Bending Radius  3 x Overall Diameter (D<12mm);
  4 x Overall Diameter (D>12mm)

                                    

 

        Chemical & Environmental Properties

EN 60684-2 No fluorine
EN 50305; EN 60811-2-1 Resistance to oil & fuel
EN 50305 Resistance to ozone

 

 

Fire Performance for rolling stock application


EN 50306-2  
Hazard levels HL1, HL2/HL3, HL4
DIN 5510-2    Protection level 1/2/3/4
BS 6853  Interior use 1a, 1b, II; Exterior use 1a, 1b, II
NF F 16-101 FO

 


       

                

Fire Performance in general

EN 50265-2-1; IEC 60332-1; BS 4066-1 Vertical flame propogation for a single insulated wire or cable
EN 50266-2-4 + EN 50305; IEC 60332-3C; Fire propagation of bunched wires and cables;
VDE 0472 Teil 804; BS 4066-3; NFC 32070  
EN 50268-2; IEC 61034-2; VDE 0472 Teil 816 Smoke density
EN 50267-2-1; IEC 60754-1; VDE 0472 Teil 815 Halogen Free
EN 50267-2-2/3; IEC 60754-2; VDE 0472 Teil 813 Corrosivity of gases (Acidity & Conductivity)
EN 50305; NFX 70-100; NFF 63808; TM1-04; BS6853 Toxicity index
NFF 16101; NFF 63808; BS6853 Smoke index

FRL-SW-1SU 0.6/1 kV

Nominalen Querschnitt

Dirigent

Durch
messer

(a)

MIN. Bedeuten, Dicke der Dämmung

Außendurchmesser

Gew
icht

Leiter
wider
stand AT 20°C

Isolations
wider
stand AT 20°C

Isolations
wider
stand AT 90°C

min

max

max

min

min

mm2

mm

mm

mm

mm

kg/km

Ω/km

MΩ·km

MΩ·km

1.0

1.25

0.8

2.8

3.2

18

20

65

0.65

1.5

1.5

0.8

3.0

3.5

20

13.7

55

0.55

2.5

1.95

0.8

3.4

3.9

30

8.21

50

0.5

4.0

2.5

0.8

3.9

4.6

50

5.09

40

0.4

6.0

3.0

0.9

4.6

5.4

70

3.39

35

0.35

10

3.9

1.1

5.8

6.8

130

1.95

30

0.3

16

5.0

1.1

7.2

8.5

170

1.24

30

0.3

25

6.4

1.3

8.6

10

260

0.795

30

0.3

35

7.7

1.3

10.2

11.5

350

0.565

25

0.25

50

9.2

1.5

11.6

13.5

500

0.393

25

0.25

70

11.0

1.5

13.3

15.5

690

0.277

20

0.2

95

12.5

1.6

14.9

17.4

910

0.210

20

0.2

120

14.2

1.6

16.5

19.3

1120

0.164

20

0.2

150

15.8

1.9

18.5

21.7

1430

0.132

15

0.15

185

17.5

1.9

20.1

23.6

1720

0.108

15

0.15

240

20.1

2.1

22.9

26.8

2290

0.0817

15

0.15

300

22.5

2.2

25.4

29.7

2810

0.0654

10

0.1

400

25.8

2.3

28.7

33.6

2690

0.0495

10

0.1

 

 

 

 

 

 

 

 

 

 

 

 


(a) = for information, indicative only

FRL-SW-3SU 1.8/3 kV

Nominalen Querschnitt

Dirigent

Durch
messer

(a)

MIN. Bedeuten, Dicke der Dämmung

Außendurchmesser

Gew
icht

Leiter
wider
stand AT 20°C

Isolations
wider
stand AT AT 20°C

Isolations
wider
stand AT AT90°C

min

max

max

min

min

mm2

mm

mm

mm

mm

kg/km

Ω/km

MΩ·km

MΩ·km

1.5

1.5

2.5

6.2

7.3

70

13.7

120

1.2

2.5

1.95

2.5

6.6

7.8

90

8.21

100

1.0

4.0

2.5

2.5

7.1

8.4

110

5.09

90

0.9

6.0

3.0

2.5

7.6

8.9

130

3.39

80

0.8

10

3.9

2.5

8.4

9.9

190

1.95

65

0.65

16

5.0

2.5

9.5

11.1

250

1.24

50

0.55

25

6.4

2.5

10.8

12.7

330

0.795

45

0.45

35

7.7

2.5

12.0

14.1

430

0.565

40

0.4

50

9.2

2.5

13.4

15.7

570

0.393

35

0.35

70

11.0

2.5

15.1

17.7

760

0.277

30

0.3

95

12.5

2.7

16.9

19.8

980

0.210

30

0.3

120

14.2

2.7

18.5

21.7

1210

0.164

25

0.25

150

15.8

2.7

20.0

23.4

1500

0.132

20

0.2

185

17.5

2.7

21.6

25.3

1800

0.108

20

0.2

240

20.1

2.7

24.1

28.2

2360

0.0817

20

0.2

300

22.5

2.7

26.3

30.8

2840

0.0654

15

0.15

400

25.8

2.9

29.8

34.9

3800

0.0495

15

0.15

a) = for information, indicative only