Accueil
Qui sommes-nous
produits
Télécharger
Bibliothèque technique
Contact
Demande de renseignements
Plan du site
Liens
 

Alarme et Câble Audio et électronique

Câble équivalent de Belden

Câbles Coaxiaux

Câbles de contrôle

Câbles Fibres Optiques

Câbles Flexibles

Câble d'instrumentation

Lan Câbles
Câbles d'Energie
Câbles résistants au feu
Câbles Industriels
Railway Câble

Robotique

Rolling Stock câble
Caoutchouc et Câble Crâne
Câble de Sécurité

Câble Téléphonique

Aéroport Câbles

Câbles bus

Cable Glands

Data Cable

Câbles de détection de chaleur
Câbles hautes températures
Autoroute Câbles
Marine, pétrole, gaz et pétrochimie Câbles
Câbles spécial
Spiral Câbles
Câbles thermocouple
Other Cables
     
  indoor tight buffer fiber optic cable  
Indoor Used Tight Buffered Fiber
Optical Cable
outdoor multi loose tube fiber optic cable
Outdoor Used Multi Loose Tube
Fiber Optical Cable
 

Solutions D'Affaires

Matrix6e 10G Ethernet UTP Cabling Solution

 

ADDISON MATRIX 6E 10G UTP Cabling System is a end-to-end ethernet solution. It combines current application and further development, in accordance with 10GBASE-T standard. It is characterized by:

 

• 10Gb/s transmission rate

• High quality with low cost

• Easy to install and maintain

• 30 years warranty

 

1 . MATRIX 6E 10G UTP Ethernet

 

With the falling cost of the Ethernet equipment, the adoption of 10G Ethernet has become a trend. IEEE founded 10G BASE-T working group in 2002 to evaluate the feasibility of 10G working on 100 meter cabling system. Addison lunched 10G unshielded and shielded copper cable cabling solution in 2005 which is called MATRIX 6E. MATRIX 6E is an enhanced version of our current 6 category. It is in accordance with the latest channel requirement which is regulated by IEEE 802.3 an working group. It can offer 500MHz 10G channel performance. With special patented technology, it can increase transmission capacity to achieve 10Gb/second over 55 to 100 meter cable channel length.

In addition, MATRIX 6E is an integrated end to end solution. Every part in the system adopts advanced design for achieving superior NEXT performance. It offers good margin for good channel performance.

 MATRIX 6E10G UTP SYSTEM PERFORMANCE
Addison MATRIX 6E 10G UTP Ethernet Cabling System is an enhanced version of Addison 6 category system, It could achieve transmission rate of 10G Ethernet on a full channel length of 100 meter.

Firstly, this system adopts the basic design principle for category 6 system and therefore the technique is mature and the performance is well proven.

At the early stage of designing the Matrix 6E system, category 7 cables and connectivity hardwares were designed to realize 10G solutions. However, with the use o category 7 system, a new installation guidelines are required and there will be a significant training required for implementation of the 10G system. In view of this, we come to an issue of providing 10G solution with our existing Category 6 system. The answer is positive. The bandwidth of the enhanced 6 category system could now be expanded to 500MHz. Even better, our enhanced category 6 cables can provide a bandwidth of 600MHz, meeting the transmission rate of 10G.
Category 6 10G system is proved to be a mature and feasible solution. This system is acknowledged by the cabling industry and is widely adopted in the installations.
The second points of the 10G system is its high quality as compared to low cost.
It takes quite a long time to develop category 7 system and which involves a lot of manpower and resources to come to the present stage. Therefore, it is not surprising to come out with high cost. However, enhanced 6 category system is just an upgraded version of category 6. That is to say, they have a similar pricing as normal category 6 system.  

Last but not the least, enhanced 6 category system is easy to maintain. Addison offers 30 years quality warranty which can make customers well assured of the product quality.

2.  MATRIX 6E 10G INSTALLATION AND MAITENANCE

It is easy to install and maintain Addison MATRIX 6E 10G UTP Ethernet cabling system.

MATRIX 6E is developed based on the existing category 6 system and therefore it follows the same installation guidelines applied for the category 6 system. Many technical issues have to be addressed for 10G system because of its high transmission capacity but this can be resolved with our MATRIX 6E system.

In actual application, Addison MATRIX 6E 10G UTP is as flexible as our current Cat5e and Cat6 system, It is an advanced and open system ensuring the highest return in the system investment and becomes the most preferred copper solutions in the industry.

3. MATRIX 6E 10G QUALITY ASSURANCE

Addison MATRIX 6E 10G UTP is launched out with full quality guarantee.

Firstly, this system provides 30 Year product warranty.

Backed to 1995s, Addison cabling system is launched out with 25 years product warranty. In view of increasing demand for extension of product assurance period, Addison extends the product warranty to 30 year. Addison will apply the same product warranty policy for MATRIX 6E 10G system. Secondly, all the products have to pass strict quality test system when come out.

To ensure our 30 year product warranty, all the components including cables and cabling accessories should be component compliant in order to maintain the overall quality of the whole cabling system.

Last but not the least, technical support will be rendered for implementing the 10G solutions.

In view of this changing requirement for the 10G solutions, some customers may not have the latest update of the related standard. We have a special technical team dedicated to answering the technical questions raised by our customers about the 10G issues.