EN50288-7 Cables
XLPE Insulated, LSZH Sheathed Instrumentation Cables
PVC Insulated, PVC Sheathed, Individual & Overall Screened, Armoured Instrumentation Cables (Multitriple)
RE-Y(St)YSWAY-TiMF 70°C / 300 V EN 50288-7 Cables

APPLICATION:

EN 50288-7 transmission of analogue and digital signals in instrument and control systems; allowed for use

in zone 1 and zone 2, group II, classified areas (IEC 79-14), not allowed for direct connection to low impedance

sources, e.g. public mains electricity supply.

Recommended for indoor and outerdoor installation, on racks, trays, in conduits, in dry and wet locations; not for

direct buiral. Recommended for use as fire protection messure for people and important material assets.

STANDARDS

Basic design to EN50288-7

FIRE PERFORMANCE

Flame Retardance (Single Vertical Wire Test) EN 60332-1-2; IEC 60332-1-2; BS EN 60332-1-2; VDE 0482-332-1; NBN C 30-004 (cat. F1); NF C32-070-2.1(C2); CEI 20-35/1-2; EN 50265-2-1*; DIN VDE 0482-265-2-1*
Reduced Fire Propagation (Vertically-mounted bundled wires & cable test)*** EN 60332-3-24 (cat. C); IEC 60332-3-24; BS EN 60332-3-24; VDE 0482-332-3; NBN C 30-004 (cat. F2); NF C32-070-2.2(C1); CEI 20-22/3-4; EN 50266-2-4*; DIN VDE 0482-266-2-4
Halogen Free IEC 60754-1; EN 50267-2-1; DIN VDE 0482-267-2-1; CEI 20-37/2-1 ; BS 6425-1*
No Corrosive Gas Emission IEC 60754-2; EN 50267-2-2; DIN VDE 0482-267-2-2; CEI 20-37/2-2 ; BS 6425-2*
Minimum Smoke Emission IEC 61034-1&2; EN 61034 -1&2; DIN VDE 0482-1034-1&2; CEI 20-37/3-1&2; EN 50268-1&2*; BS 7622-1&2*
NoToxic gases NES 02-713; NF C 20-454

Note:Asterisk * denotes superseded standard, *** denotes optional.

VOLTAGE RATING

300V

CABLE CONSTRUCTION

Conductor: Annealed copper solid or plain copper stranded to IEC 60228 Class 2.

Insulation: PVC compound as per EN 50290-2-21.

Individual Screen: Aluminium/polyester tape is applied over each pair metallic side down in contact with tinned

copper drain wire, 0.5mm²

Pair:Two conductors twisted to form a pair

Lay-up: Pairs laid up in layers of optimum pitch

Separator: Polyester tape

Overall Screen: Aluminium/polyester tape with tinned copper drain wire, 0.5mm2

Inner Sheath: Thermoplastic PVC compound

Armour: Galvenized round steel wire, EN 10257-1

Outer Sheath: Thermoplastic PVC compound as per EN 50290-2-22. UV resistance, hydrocarbon resistance, oil

resistance, anti rodent and anti termite properties can be offered as option. Compliance to fire performance

standard (IEC 60332-1, IEC 60332-3, UL 1581, UL 1666 etc) depends on the oxygen index of the PVC compound

and the overall cable design. LSPVC can also be provided upon request.

COLOUR CODE

Insulation: Black / White / Red, continuously numbered on white core(1, 2..)for multitriples.

Outer Sheath: Black or blue for intrinsically safe systems

Physical AND THERMAL PROPERTIES

Temperature Range During Operation (Fixed State): -30°C – +70°C

Temperature Range During Installation (Mobile State): -5°C – +50°C

Minimum Bending Radius: 7.5 X Overall Diameter

Sunlight Resistance: UL 1581 section 1200

Oil Resistance: ICEA S-73-532(Test temperature +60°C, duration 4h. Retention: min 60% of tensile

strength/min.60% of elongation)

Electrical PROPERTIES

Conductor Area Size mm 2 0.5 0.75 1.0 1.3 1.5
Insulation thickness (nominal) mm 0.4 0.4 0.4 0.45 0.45
Conductor resistance (20°C) Ω/km 36.7 25 18.5 14.2 12.3
Insulation resistance (20°C) MΩ.km(Min.) 5000
Mutual Capacitance (1 kHz) pF/m(Max.) 115
Inductance mH/km(Max.) 1
Capacitance unbalance(1 kHz) pF/500 m (Max.) 500
L / R (ratio) (max.) μH/Ω 25 25 25 40 40
Operating voltage UrmsV 300
Test Voltage Core to Core V 1500
Core to Screen V 1500

CONSTRUCTION PARAMETERS

Caledonian Cable Code RE-Y(St)YSWAY-TiMF
No. of Triples x3xCross Section Nominal Insulation Thick -ness Nominal Inner Sheath Thick -ness Nominal Overall Diameter Over Inner Sheath Nominal Armour Wire Diameter Nominal Outer Sheath Thick -ness Nominal Overall Diameter Approx. Weight
  No.x3xmm2 mm mm mm mm mm mm kg/km
0.5mm2, Multi-striple
RE-Y(St)YSWAY-TiMF 2T0.5 2x3x0.5 0.35 1.0 9.7 0.9 1.4 14.3 363
RE-Y(St)YSWAY-TiMF 4T0.5 4x3x0.5 0.35 1.0 11.1 0.9 1.4 15.7 456
RE-Y(St)YSWAY-TiMF 5T0.5 5x3x0.5 0.35 1.1 12.4 0.9 1.5 17.2 516
RE-Y(St)YSWAY-TiMF 6T0.5 6x3x0.5 0.35 1.1 14.0 0.9 1.5 18.8 611
RE-Y(St)YSWAY-TiMF 8T0.5 8x3x0.5 0.35 1.1 14.9 0.9 1.5 19.7 766
RE-Y(St)YSWAY-TiMF 10T0.5 10x3x0.5 0.35 1.2 17.0 1.25 1.6 22.7 950
RE-Y(St)YSWAY-TiMF 12T0.5 12x3x0.5 0.35 1.2 17.6 1.25 1.6 23.3 975
RE-Y(St)YSWAY-TiMF 16T0.5 16x3x0.5 0.35 1.3 20.1 1.25 1.7 26.0 1169
RE-Y(St)YSWAY-TiMF 20T0.5 20x3x0.5 0.35 1.4 22.3 1.25 1.7 28.2 1365
RE-Y(St)YSWAY-TiMF 24T0.5 24x3x0.5 0.35 1.5 24.4 1.25 1.8 30.5 1604
0.75mm2, Multi-striple
RE-Y(St)YSWAY-TiMF 2T0.75 2x3x0.75 0.38 1.0 10.6 0.9 1.4 15.2 408
RE-Y(St)YSWAY-TiMF 4T0.75 4x3x0.75 0.38 1.1 12.4 0.9 1.5 17.2 521
RE-Y(St)YSWAY-TiMF 5T0.75 5x3x0.75 0.38 1.1 13.7 0.9 1.5 18.5 590
RE-Y(St)YSWAY-TiMF 6T0.75 6x3x0.75 0.38 1.1 15.4 0.9 1.5 20.2 819
RE-Y(St)YSWAY-TiMF 8T0.75 8x3x0.75 0.38 1.2 16.7 0.9 1.6 21.7 941
RE-Y(St)YSWAY-TiMF 10T0.75 10x3x0.75 0.38 1.3 19.0 1.25 1.6 24.7 1103
RE-Y(St)YSWAY-TiMF 12T0.75 12x3x0.75 0.38 1.3 19.7 1.25 1.7 25.6 1176
Caledonian Cable Code RE-Y(St)YSWAY-TiMF
No. of Triples x3xCross Section Nominal Insulation Thick -ness Nominal Inner Sheath Thick -ness Nominal Overall Diameter Over Inner Sheath Nominal Armour Wire Diameter Nominal Outer Sheath Thick -ness Nominal Overall Diameter Approx. Weight
  No.x3xmm2 mm mm mm mm mm mm kg/km
RE-Y(St)YSWAY-TiMF 16T0.75 16x3x0.75 0.38 1.4 22.5 1.25 1.7 28.4 1439
RE-Y(St)YSWAY-TiMF 20T0.75 20x3x0.75 0.38 1.5 24.9 1.25 1.8 31.0 1804
RE-Y(St)YSWAY-TiMF 24T0.75 24x3x0.75 0.38 1.6 27.2 1.25 1.9 33.5 2164
1.0mm2, Multi-striple
RE-Y(St)YSWAY-TiMF 2T1.0 2x3x1 0.4 1.0 11.5 0.9 1.4 16.1 447
RE-Y(St)YSWAY-TiMF 4T1.0 4x3x1 0.4 1.1 13.4 0.9 1.5 18.2 579
RE-Y(St)YSWAY-TiMF 5T1.0 5x3x1 0.4 1.1 14.8 0.9 1.5 19.6 688
RE-Y(St)YSWAY-TiMF 6T1.0 6x3x1 0.4 1.2 16.9 0.9 1.5 21.7 913
RE-Y(St)YSWAY-TiMF 8T1.0 8x3x1 0.4 1.2 18.1 1.25 1.6 23.8 1033
RE-Y(St)YSWAY-TiMF 10T1.0 10x3x1 0.4 1.3 20.7 1.25 1.7 26.6 1277
RE-Y(St)YSWAY-TiMF 12T1.0 12x3x1 0.4 1.3 21.4 1.25 1.7 27.3 1380
RE-Y(St)YSWAY-TiMF 16T1.0 16x3x1 0.4 1.4 24.4 1.25 1.7 30.3 1686
RE-Y(St)YSWAY-TiMF 20T1.0 20x3x1 0.4 1.5 27.1 1.25 1.8 33.2 2200
RE-Y(St)YSWAY-TiMF 24T1.0 24x3x1 0.4 1.6 29.6 1.6 1.9 36.6 2504
1.3mm2, Multi-striple
RE-Y(St)YSWAY-TiMF 2T1.3 2x3x1,3 0.45 1.1 12.8 0.9 1.5 17.6 532
RE-Y(St)YSWAY-TiMF 4T1.3 4x3x1,3 0.45 1.1 14.7 0.9 1.5 19.5 684
RE-Y(St)YSWAY-TiMF 5T1.3 5x3x1,3 0.45 1.2 16.5 0.9 1.6 21.5 924
RE-Y(St)YSWAY-TiMF 6T1.3 6x3x1,3 0.45 1.3 18.8 1.25 1.6 24.5 1089
RE-Y(St)YSWAY-TiMF 8T1.3 8x3x1,3 0.45 1.3 20.1 1.25 1.7 26.0 1249
RE-Y(St)YSWAY-TiMF 10T1.3 10x3x1,3 0.45 1.4 23.0 1.25 1.8 29.1 1482
RE-Y(St)YSWAY-TiMF 12T1.3 12x3x1,3 0.45 1.5 24.0 1.25 1.8 30.1 1592
RE-Y(St)YSWAY-TiMF 16T1.3 16x3x1,3 0.45 1.6 27.4 1.25 1.9 33.7 2222
RE-Y(St)YSWAY-TiMF 20T1.3 20x3x1,3 0.45 1.7 30.4 1.6 2.0 37.6 2592
RE-Y(St)YSWAY-TiMF 24T1.3 24x3x1,3 0.45 1.8 33.1 1.6 2.0 40.3 2957
1.5mm2, Multi-striple
RE-Y(St)YSWAY-TiMF 2T1.5 2x3x1,5 0.45 1.1 13.2 0.9 1.5 18.0 531
RE-Y(St)YSWAY-TiMF 4T1.5 4x3x1,5 0.45 1.2 15.4 0.9 1.5 20.2 817
Caledonian Cable Code RE-Y(St)YSWAY-TiMF
No. of Triples x3xCross Section Nominal Insulation Thick -ness Nominal Inner Sheath Thick -ness Nominal Overall Diameter Over Inner Sheath Nominal Armour Wire Diameter Nominal Outer Sheath Thick -ness Nominal Overall Diameter Approx. Weight
  No.x3xmm2 mm mm mm mm mm mm kg/km
RE-Y(St)YSWAY-TiMF 5T1.5 5x3x1,5 0.45 1.2 17.1 1.25 1.6 22.8 998
RE-Y(St)YSWAY-TiMF 6T1.5 6x3x1,5 0.45 1.3 19.5 1.25 1.6 25.2 1162
RE-Y(St)YSWAY-TiMF 8T1.5 8x3x1,5 0.45 1.4 21.1 1.25 1.7 27.0 1304
RE-Y(St)YSWAY-TiMF 10T1.5 10x3x1,5 0.45 1.5 24.1 1.25 1.8 30.2 1541
RE-Y(St)YSWAY-TiMF 12T1.5 12x3x1,5 0.45 1.5 24.9 1.25 1.8 31.0 1952
RE-Y(St)YSWAY-TiMF 16T1.5 16x3x1,5 0.45 1.6 28.4 1.6 1.9 35.4 2384
RE-Y(St)YSWAY-TiMF 20T1.5 20x3x1,5 0.45 1.7 31.6 1.6 2.0 38.8 2795
RE-Y(St)YSWAY-TiMF 24T1.5 24x3x1,5 0.45 1.8 34.4 1.6 2.1 41.8 3093

Note : Other conductor sizes & core configurations are available upon request.