EN50288-7 Cables
XLPE Insulated, LSZH Sheathed Instrumentation Cables

Pe Insulated, PVc sheathed, overall screened & armoured Instrumentation cables (Multipair)
re-2Y(st)YsWaY 90°c / 300V

re-2Y(st)YsWaY 90°c / 300V

APPLICATION

EN 50228-7 cables are used for transmission of analogue and digital signals in instrument and control systems;

allowed for use in zone 1 and zone 2, group II, classified areas (IEC 79-14), not allowed for direct connection to

low impedance sources, e.g. public mains electricity supply. Recommended for indoor and outerdoor installation,

on racks, trays, in conduits, in dry and wet locations; not for direct buiral. Recommended for use as fire

protection messure for people and important material assets.

STANDARDS

Basic design to EN 50288-7

FIRE PERFORMANCE

Flame Retardance (Single Vertical Wire Test) EN 60332-1-2; IEC 60332-1-2; BS EN 60332-1-2; VDE 0482-332-1; NBN C 30-004 (cat. F1); NF C32-070-2.1(C2); CEI 20-35/1-2; EN 50265-2-1*; DIN VDE 0482-265-2-1*
Reduced Fire Propagation(Vertically-mounted bundled wires & cable test) EN 60332-3-24 (cat. C); IEC 60332-3-24; BS EN 60332-3-24; VDE 0482-332-3; NBN C 30-004 (cat. F2); NF C32-070-2.2(C1); CEI 20-22/3-4; EN 50266-2-4*; DIN VDE 0482-266-2-4
Halogen Free IEC 60754-1; EN 50267-2-1; DIN VDE 0482-267-2-1; CEI 20-37/2-1 ; BS 6425-1*
No Corrosive Gas Emission IEC 60754-2; EN 50267-2-2; DIN VDE 0482-267-2-2; CEI 20-37/2-2 ; BS 6425-2*
Minimum Smoke Emission IEC 61034-1&2; EN 61034 -1&2; DIN VDE 0482-1034-1&2; CEI 20-37/3-1&2; EN 50268-1&2*; BS 7622-1&2*
No Toxic gases NES 02-713; NF C 20-454

Note: Asterisk * denotes superseded standard, *** denotes optional.

VOLTAGE RATING

300

CABLE CONSTRUCTION

Conductor: Annealed copper solid or plain copper stranded to IEC 60228 Class 2.

Insulation: PE compound as per EN 50290. 2-23.

Pairs: Two insulated conductors uniformly twisted together with a lay not exceeding 100mm

Binder tape: PETP transparent tape

Overall Screen: Aluminium/polyester tape is applied over the laid up pairs metallic side down in contact with

tinned copper drain wire, 0.5mm²

Inner Sheath: PVC compound as per EN 50290-2-22.

Amouring: Galvanized steel wire armour

Outer Sheath: Thermoplastic PVC compound as per EN 50290-2-22. UV resistance, hydrocarbon resistance, oil

resistance, anti rodent and anti termite properties can be offered as option. Compliance to fire performance

standard (IEC 60332-1, IEC 60332-3, UL 1581, UL 1666 etc) depends on the oxygen index of the PVC compound

and the overall cable design. LSPVC can also be provided upon request.

COLOUR CODE

Insulation: Black / White, continuously numbered on white core(1, 2..)for multipair.

Outer Sheath: Black or blue for intrinsically safe systems

Physical AND THERMAL PROPERTIES

Temperature Range During Operation (Fixed State): -30°C – +90°C

Temperature Range During Installation (Mobile State): -20°C – +50°C

Minimum Bending Radius: 10 X Overall Diameter

Sunlight Resistance: UL 1581 section 1200

Oil Resistance: ICEA S-73-532(Test temperature +60°C, duration 4h. Retention: min 60% of tensile

strength/min.60% of elongation)

Electrical PROPERTIES

Conductor Area Size mm 2 0.5 0.75 1.0 1.3 1.5
Insulation thickness (nominal) mm 0.35 0.38 0.4 0.45 0.45
Conductor resistance (20°C) Ω/km 36.7 25 18.5 14.2 12.3
Insulation resistance (20°C) MΩ.km(Min.) 5000
Mutual Capacitance (1 kHz) pF/m(Max.)  
  up to 4 pairs 90 90 90 102 102
  above 4 pairs 75 75 75 85 85
Capacitance unbalance(1 kHz) pF/500 m (Max.) 500
Inductance mH/km (Max.) 1
L / R (ratio) (max.) μH/Ω 25 25 25 40 40
Operating voltage Urms V 300
Test Voltage Core to Core V 1500
Core to Screen V 1500

CONSTRUCTION PARAMETERS

 

 

Caledonian Cable Code

RE-2Y(St)YSWAY

 

No. of Pairsx2 xCross Section

 

Nominal Insulation Thick
-ness

 

Nominal Inner Sheath Thick
-ness

Nominal
Overall Diameter Over Inner Sheath

 

Nominal Armour Wire Diameter

 

Nominal Outer Sheath Thick
-ness

 

No.x2xmm2

mm2

mm

mm

mm

mm

0.5mm2, Multipair

RE-2Y(St)YSWAY 2P0.5

2x2x0.5

0.35

0.9

7.6

0.9

1.3

RE-2Y(St)YSWAY 4P0.5

4x2x0.5

0.35

0.9

8.8

0.9

1.4

RE-2Y(St)YSWAY 5P0.5

5x2x0.5

0.35

1.0

9.8

0.9

1.4

RE-2Y(St)YSWAY 6P0.5

6x2x0.5

0.35

1.0

10.6

0.9

1.4

RE-2Y(St)YSWAY 8P0.5

8x2x0.5

0.35

1.0

11.3

0.9

1.4

RE-2Y(St)YSWAY 10P0.5

10x2x0.5

0.35

1.1

12.9

0.9

1.5

RE-2Y(St)YSWAY 12P0.5

12x2x0.5

0.35

1.1

13.5

0.9

1.5

RE-2Y(St)YSWAY 16P0.5

16x2x0.5

0.35

1.1

15.2

0.9

1.5

RE-2Y(St)YSWAY 20P0.5

20x2x0.5

0.35

1.2

16.9

0.9

1.6

RE-2Y(St)YSWAY 24P0.5

24x2x0.5

0.35

1.2

18.3

1.25

1.6

0.75mm2, Multipair

RE-2Y(St)YSWAY 2P0.75

2x2x0.75

0.38

0.9

8.5

0.9

1.4

RE-2Y(St)YSWAY 4P0.75

4x2x0.75

0.38

1.0

10.0

0.9

1.4

RE-2Y(St)YSWAY 5P0.75

5x2x0.75

0.38

1.0

10.9

0.9

1.4

RE-2Y(St)YSWAY 6P0.75

6x2x0.75

0.38

1.0

11.8

0.9

1.4

RE-2Y(St)YSWAY 8P0.75

8x2x0.75

0.38

1.1

12.8

0.9

1.5

RE-2Y(St)YSWAY 10P0.75

10x2x0.75

0.38

1.1

14.5

0.9

1.5

RE-2Y(St)YSWAY 12P0.75

12x2x0.75

0.38

1.1

15.1

0.9

1.5

RE-2Y(St)YSWAY 16P0.75

16x2x0.75

0.38

1.2

17.3

0.9

1.6

 

 

Caledonian Cable Code

RE-2Y(St)YSWAY

 

No. of Pairsx2 xCross Section

 

Nominal Insulation Thick
-ness

 

Nominal Inner Sheath Thick
-ness

Nominal
Overall Diameter Over Inner Sheath

 

Nominal Armour Wire Diameter

 

Nominal Outer Sheath Thick
-ness

 

No.x2xmm2

mm2

mm

mm

mm

mm

RE-2Y(St)YSWAY 20P0.75

20x2x0.75

0.38

1.3

19.2

1.25

1.6

RE-2Y(St)YSWAY 24P0.75

24x2x0.75

0.38

1.3

20.8

1.25

1.6

1.0mm2, Multipair

RE-2Y(St)YSWAY 2P1.0

2x2x1.0

0.4

0.9

9.2

0.9

1.4

RE-2Y(St)YSWAY 4P1.0

4x2x1.0

0.4

1.0

10.9

0.9

1.4

RE-2Y(St)YSWAY 5P1.0

5x2x1.0

0.4

1.0

11.9

0.9

1.4

RE-2Y(St)YSWAY 6P1.0

6x2x1.0

0.4

1.0

13.0

0.9

1.4

RE-2Y(St)YSWAY 8P1.0

8x2x1.0

0.4

1.1

14.0

0.9

1.5

RE-2Y(St)YSWAY 10P1.0

10x2x1.0

0.4

1.1

15.9

0.9

1.5

RE-2Y(St)YSWAY 12P1.0

12x2x1.0

0.4

1.2

16.8

0.9

1.5

RE-2Y(St)YSWAY 16P1.0

16x2x1.0

0.4

1.2

19.0

1.25

1.6

RE-2Y(St)YSWAY 20P1.0

20x2x1.0

0.4

1.3

21.1

1.25

1.7

RE-2Y(St)YSWAY 24P1.0

24x2x1.0

0.4

1.4

23.1

1.25

1.7

1.3mm2, Multipair

RE-2Y(St)YSWAY 2P1.3

2x2x1.3

0.45

1.0

10.4

0.9

1.4

RE-2Y(St)YSWAY 4P1.3

4x2x1.3

0.45

1.0

12.0

0.9

1.4

RE-2Y(St)YSWAY 5P1.3

5x2x1.3

0.45

1.1

13.4

0.9

1.5

RE-2Y(St)YSWAY 6P1.3

6x2x1.3

0.45

1.1

14.6

0.9

1.5

RE-2Y(St)YSWAY 8P1.3

8x2x1.3

0.45

1.2

15.7

0.9

1.5

RE-2Y(St)YSWAY 10P1.3

10x2x1.3

0.45

1.2

17.9

0.9

1.6

RE-2Y(St)YSWAY 12P1.3

12x2x1.3

0.45

1.3

18.9

1.25

1.6

RE-2Y(St)YSWAY 16P1.3

16x2x1.3

0.45

1.3

21.4

1.25

1.7

RE-2Y(St)YSWAY 20P1.3

20x2x1.3

0.45

1.4

23.8

1.25

1.8

RE-2Y(St)YSWAY 24P1.3

24x2x1.3

0.45

1.5

25.9

1.25

1.8

1.5mm2, Multipair

RE-2Y(St)YSWAY 2P1.5

2x2x1.5

0.45

1.0

10.8

0.9

1.4

RE-2Y(St)YSWAY 4P1.5

4x2x1.5

0.45

1.1

12.7

0.9

1.5

 

 

Caledonian Cable Code

RE-2Y(St)YSWAY

 

No. of Pairsx2 xCross Section

 

Nominal Insulation Thick
-ness

 

Nominal Inner Sheath Thick
-ness

Nominal
Overall Diameter Over Inner Sheath

 

Nominal Armour Wire Diameter

 

Nominal Outer Sheath Thick
-ness

 

No.x2xmm2

mm2

mm

mm

mm

mm

RE-2Y(St)YSWAY 5P1.5

5x2x1.5

0.45

1.1

14.0

0.9

1.5

RE-2Y(St)YSWAY 6P1.5

6x2x1.5

0.45

1.2

15.2

0.9

1.5

RE-2Y(St)YSWAY 8P1.5

8x2x1.5

0.45

1.2

16.4

0.9

1.6

RE-2Y(St)YSWAY 10P1.5

10x2x1.5

0.45

1.3

18.8

1.25

1.6

RE-2Y(St)YSWAY 12P1.5

12x2x1.5

0.45

1.3

19.7

1.25

1.7

RE-2Y(St)YSWAY 16P1.5

16x2x1.5

0.45

1.4

22.5

1.25

1.7

RE-2Y(St)YSWAY 20P1.5

20x2x1.5

0.45

1.5

25.0

1.25

1.8

RE-2Y(St)YSWAY 24P1.5

24x2x1.5

0.45

1.5

27.1

1.25

1.8

Note : Other conductor sizes & core configurations are available upon request